Kabelrolle basierend auf Prusa Filament Spulen / Cable reel based on Prusa filament spools
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Verwendung der Prusa 1 kg und 2 kg Filament Spulen /Use of the Prusa 1 kg and 2 kg filament spools
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 134
- Wydruki
- 2
- Wyświetlenia
- 1864
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
for English see below
Bisher habe ich Lautsprecherkabel und Netzwerkkabel aus dem Bühnenbau auf Kartonagen gewickelt. Jeder kennt wahrscheinlich das resultierende Problem: es entstehen Kabelschlingen, je länger das Kabel umso schlimmer.
Mit leeren Filamentspulen von Prusa lassen sich leicht Kabeltrommeln mit Kurbeln herstellen. Dadurch wird das Problem vermieden.
Diese Spule wird einfach auf eine leere 1kg oder 2kg Prusa Spule aufgesteckt (es muss eine Prusa Spule sein, denn ich verwende die Prusa Hexagone, um die Teile einzustecken)
Die Rolle ist natürlich auch für Weihnachtsbeleuchtung, LED Ketten, Wäscheleinen, Seil, Drachenschnüre etc geeignet
Druck
Ich habe mit Prusa PLA gedruckt. Wenn ihr die Projektdatei verwendet, findet ihr angepasste Stützen. Rändelmuster, und Gewinde benötigen keine Stützen, einige Teile schon. Die verwendeten Stützen sind einfach mit einem kleinen Phasenprüferschraubenzieher und einer Zange zu entfernen.
Die Distanzrolle ist nicht unbedingt nötig, vor allem wenn ihr nur die 1 kG Rolle verwendet. Für die 2 kg Rolle empfehle ich, die Distanzhülle aufzustecken. So könnt ihr die Achse "fest" zusammenschrauben, ohne dass sich die Rolle beim Aufwickeln verklemmt.
Den Kabelkanal könnt ihr optional verwenden, um den inneren Kabelanfang aus der Rolle herauszuführen. So könnt ihr zum Beispiel das Lautsprecher- oder Netzwerkkabel verwenden, ohne es ganz abzuspulen.
Aufbau
Zunächst müsst ihr das Kurbelkreiz vorbereiten. Steckt dazu die Kurbelachse von der abgerundeten Seite in das X. Das benötigt etwas Druck. Bewegt anschließend, die Kurbelachse ein paar mal, danach ist sie leichtgängig. (Achtung: Wenn die Kurbelachse einmal eingesteckt ist, lässt sie sich nur sehr schwer wieder entfernen! )
Nun steckt ihr das zusammengebaute Kurbelkreuz auf das Hexgon Muster (ihr erkennt in der Spule eine X Struktur in der dieHexgone in einer Linie liegen.) Das Kreuz lässt sich leicht aufstecken. Nun steckt ihr von der gegenüberliegenden Seite den gerändelten Griff in die Spule und berschraubt ihn von der Kurbelseite her. Achtung: Bei der 2 kg Spule empfehle ich, vorher die Distanzhülle auf die Schraube aufzuschieben.
Für Netzwerk- oder Lautsprecherkabel, könnt ihr die Kabelklemme aufstecken (von dem gerändelten Griff her). Das Hexagon Muster muss innen liegen und passt genau in die Einkerbung mit den Längenmaßen.
Eine bebilderte Zusammenbauanleitung und Kurzvideos folgen demnächst.
English
Up to now, I have wound speaker cables and network cables from stage construction onto cardboard boxes. Everyone probably knows the resulting problem: cable loops, the longer the cable the worse.
Empty filament spools from Prusa make it easy to produce cable drums with cranks. This avoids the problem.
This spool is simply attached to an empty 1kg or 2kg Prusa spool (it has to be a Prusa spool, because I use the Prusa Hexagons to insert the parts)
The reel is of course also suitable for Christmas lights, LED chains, washing lines, rope, kite cords etc.
Printing
I printed with Prusa PLA. If you use the project file, you will find customised supports. Knurl patterns and threads don't need supports, some parts do. The supports used are easy to remove with a small phase tester screwdriver and a pair of pliers.
The distance roller is not absolutely necessary, especially if you only use the 1 kG roller. For the 2 kg roller, I recommend attaching the spacer sleeve. This allows you to screw the axle "tightly" together without the roller jamming when winding.
You can optionally use the cable duct to lead the inner end of the cable out of the reel. This allows you to use the speaker or network cable, for example, without having to unwind it completely.
Illustrated assembly instructions and short videos will follow soon.
Assembly
Firstly, you need to prepare the crank cross. To do this, insert the crank axle into the X from the rounded side. This requires a little pressure. Then move the crank axle a few times, after which it will run smoothly. (Caution: Once the crank axle has been inserted, it is very difficult to remove! )
Now place the assembled crank cross on the hexgon pattern (you will recognise an X structure in the spool in which the hexgons lie in a line). The cross is easy to attach. Now insert the knurled handle into the spool from the opposite side and unscrew it from the crank side. Caution: For the 2 kg spool, I recommend pushing the spacer sleeve onto the screw beforehand.
For network or loudspeaker cables, you can attach the cable clamp (from the knurled handle). The hexagon pattern must be on the inside and fit exactly into the notch with the length dimensions.
Illustrated assembly instructions and short videos will follow soon.