FLSUN SR Multi adapter LGX lite / Orbiter / MiniSherpa extruder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple adapter for FLSUN Super Racer and Bondtech LGX lite, Orbiter V2 and Libra/Sherpa using original effector…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Simple adapter for FLSUN Super Racer and Bondtech LGX lite, Orbiter V2 and Libra/Sherpa using original effector housing.
See this for Full Printed Housing (30g lighter): https://www.printables.com/es/model/702305-lgx-lite-orbiter-sherpa-libra-flsun-sr-direct-driv
Modification Needed: Drill four holes in the original metal case and M3 threading.
Eight M3x6mm button head hex screws are used.
First fix LGX then disassemble motor to be able to screw to the casing
The photo: printing ASA with the LGX plate and the SR with enclosure. See SR enclosure here: https://www.printables.com/es/model/702303-flsun-sr-superracer-enclosure
Print Settings
Printer:
FLSUN SR
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament:
Category: 3D Printer Extruders