Toroid Coil Winder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two rings Toroid coil winder machine
- Ocena
- 0 / 5
- Polubienia
- 70
- Pobrania
- 531
- Wydruki
- 0
- Wyświetlenia
- 3906
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Two rings Toroid coil winder machine
Slider version here:
https://www.printables.com/model/1296274-slider-type-toroidal-winder
Compact version with electronics control schematic: (electronics compatible with this)
https://www.printables.com/es/model/702311-compact-toroidal-winder
This Video is for compact version but show work processes: https://youtu.be/7a5Gduhjt5c
This is a functional equipment, watch video working
Test working with 0.15mm wire: https://www.youtube.com/shorts/so5y3pX8wWY
Material:
1x JGB37 geared dc motor at 7rpm for rotate toroid
1x JGB37 geared dc motor at 500rpm for geared ring
3x Polyurethane flat roller (6x30x30mm) with two bearings
6x U0524 (5x24x7mm) nylon bearings (Rings guides)
1x V623ZZ (3x12x4mm) bearing (Wire guide)
4mm cylindrical neodymium magnet for lap counter
M3 Nut heat brass insert Length 3mm (OD 4.5mm)
M3 Button head screws, washer
M3 Grub screws
M4 Screws
M5 Screws, nuts and washer
M6 Screws, nuts and wide washers
1.5mm nail as pin to lock both rings
Felt for friction tensioner
Elastic ring for tensioner
It would be great if someone adapted nema17 stepper motors and made free software and shared it to synchronize the movement of both motors
Enjoy
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Filament:
PLA
Category: Tools