Liczymy pasujące modele…
this is a 4 blade toroidal fan meant for 775 d shaft motors and high rpm I printed mine using pla at 25% infil it's helpful to use the flat as the contact with the table. It may be beneficial to print a flat hub to help keep this flat…
a polytoroid derived from the rhombicosidodecahedron composed of cylinders representing lines Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart and Girih geometry Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart and Girih geometry Category: Math Art
a polytoroid inspired by BM Stewart and Girih geometry Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a nested polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart and Girih geometry Category: Math Art
This is a link composed of a triangular toroid and a trefoil knot. It is inspired by BM Stewart.
Toroidní transformátor 230/20 100VA kondenzator 10000uf 50v UNISIAN LCD Player Module MP3 28*64 Display Bluetooth Digital Audio Decoder Board TDM157 USB SD BT FM for Car Home Amplifier GBU8K-DIO / 800V / If 8A /Ifsm 180A TZT MH-ET LIVE…
~4g each, you can fit six of these on the Bambu X1C build plate, takes an hour and 15. Which is good, because they get lost like nobody's business.
Layer height: 0,15mm no infill PLA/PETG (doesn't matter) Check 3mf project file for cool settings
The original with @frankm10_33400 modified gear and pulling rod and a bigger toroidal based on @MeisterEdel 's design.
An artistic sculpture. It could act as a shelf sculpture, trophy or award. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer. If you collect or download,…
Toroidal Windmill - Self adjusting turbine The smooth spinning Bearing Mod from the popular ‘Toroidal Windmill'. Insta Reel The mod uses 608 (6x22x8) Bearings for smooth & fast long time spinning. Beautiful Windmill with Toroidal…
I found the Ultimate Propeller Launcher and got it up and running, but found the propeller underwhelming. There is an option from someone else for a toroidal prop, but there is only one option. I've always wondered about the diminishing…
I gutted this $45 Amazon drone https://amzn.to/3R1EyMj to create this unique toroidal drone! The toroidal propellers make it much quieter and losing the frame cuts the weight by about 33%. I included the .f3d file so the props or frame…
Caja a medida para alojar un transformador toroidal para una mesa de mezclas Behringher Xenyx qx1202usb.
This is a clamp that holds small electronics toroids. This one is designed for T37 but will also work with T50. This holds the toroid securely. It will save your finger tips and makes holding it much easier. The slide locks the toroid in…
We haphazardly reverse engineered the drone props from the Mark Rober "Zipline" video. These are from our YouTube video about printing and testing "Quiet Props" (hint: they aren't much quieter, just different lol). You can find that video…
You can get small Tesla Coil modules at eBay, built around the Exciter Slayer circuit. ... but they just do not look right without the typical top load of the "big" coils. This print is a toroidal top load for the smallest modules I…
The outer diameter is 20 cm, the diameter of the circular cylinder is 6 cm. The mounting point for the pipe is around 72 mm diameter, but you can print two top pieces and fashion your own mounting.
interior dimensions are 55mm X 70mm X 32mm. Holds a 140-43 toroid with a little extra room for thick coax or wire if needed. uses m3 screws all around to mount the end connectors and to secure the lid. Great for those in the ham radio…
The wrapped toroid can be secured to the base by two zip ties then the base can be glued to the bottom of the box for a secure fit. I printed in ABS (Polymaker) with supports.
Circular Ring Cooling setup. Designed to fit both the Stock and Ceramic Ring Hotend. Centered around the nozzle tip. Uses stock fan. Screws: 1x Short M3 screw (8-10mm up to 20mm) 3x M3x20mm 1x M3x25mm Installation: Installed by mounting…
Three models of toroidal propellers for LEGO TECHNIC. Works in both directions, but one (noted on a side of props is better). How to print: Printed without supports. Best results with nozzle up to 0,4mm and layer hight 0,1-0,2mm. Print…
EFHW antenna base. 4mm screw holes. 6mm support holes Fits this toroid: https://www.amazon.com/dp/B084LVGZ9Q Has optional ground connection hole and counterpoise hole. My personal design uses a counterpoise and I DO NOT connect it to…
Fun mechanism to play with. Based upon a patent for an experimental engine. Four chambers pass material as the two rotors alternate positions. I included an alternate version with the clearances set tighter for people with better printers…
One ring with slider type This toroid winder accepts smaller cores than my two-ring winders and simplifies the number of rings and bearings. Update : Since this is a design derived from my two ring design, the position of the counter…
A remix of spingoogL's toroidal propeller script. The 3mf file has coloured edges. This was made to fit tightly on a 1.4-mm axle.
A tiny (smaller than a “D” battery) multi-stage planetary gearbox powers the Tiny Toroidal Twist Fan , which definitely punches above its weight! A flywheel keeps the fan spinning between twists for a continuous breeze. Includes both a…
Just a toroidal propeller from RCTestFlight's video, feel free to edit:) P.S. This model can be found on Onshape.
this is a 4 blade toroidal fan meant for 775 d shaft motors and high rpm I printed mine using pla at 25% infil it's helpful to use the flat as the contact with the table. It may be beneficial to print a flat hub to help keep this flat…
I modified the toroidal fan to fit on the prop shaft of the crank fan. Everything but the fan you still need to get from the original model post. https://www.printables.com/model/1346573-double-planetary-crank-fan
Basically scaled the original fan and applied the correct hexagonal hole for the shaft
Simple parametric design to hold wire to wind a toroid easily. The end cutouts are inset the same as the width, so the default version is 30mm long and 5mm wide (for a 6mm toroid hole) so wire held for one complete wrap is 2 (L-(W 2)) =…
It only has 2 sides and 2 edges! The complete model is included to examine the beauty (or print using soluble support). The other model has two halves with places to glue in 20mm x 3mm x 2mm magnets. This mobius toroid also screws down…
The pillar has been scaled to 99% so my mobius toroid model will screw down a bit more easily. (It fit at 100% but took a significant amount of force to get it to move.)
Simple toroidal fan model made to work with the customizer. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Filament: PolyMaker ABS Black Category: Parts
Parts: ft140-43 toroid. 100pf ceramic capacitor of at least 3k - https://amzn.to/3MPVbuk 16 gauge magnet wire - https://amzn.to/3N01ifw 134 ft DX Engineering 24 gauge Hi-viz wire (4) #6 x 3/4 stainless screws Optional, but suggested. Wago…
This model was born out of the desire to build a high airflow, easy to use, and durable desiccant holder. I was not satisfied with the selection of desiccant holders designed to be used inside of 1kg spools. Most were not high flow…
a polyhedron inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid derived from the rhombicosidodecahedron composed of cylinders representing lines Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart and Girih geometry Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart and Girih geometry Category: Math Art
a polytoroid inspired by BM Stewart and Girih geometry Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a nested polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart Category: Math Art
a polytoroid inspired by BM Stewart and Girih geometry Category: Math Art
This is a link composed of a triangular toroid and a trefoil knot. It is inspired by BM Stewart.
