Toroid Clamp / Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tool desgined to hold a small ferrite toroids securely in a vice there by making winding them slightly easier.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 87
- Wydruki
- 1
- Wyświetlenia
- 437
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This a holder to help make the process of winding small toroids slightly less fiddly.
The holder is designed to work with a bench vice or other suitable clamp and will free up both your hands.
The idea is that once you have added the correct number of turns of wire required, you can then remove it from the holder and simply space out the wires and you should be good to go.
Currently the holder consists of two parts - a Base, into which the toroid fits and a top. This means you can simply print just the top and only the base you require.
Current available holders are:
- T37 Size Toroid
- T44 Size Toroid
- T50 Size Toroid
- T68 Size Toroid