Toroidal Blade For Desk Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 4" (10.16 cm) diameter blade. This was drawn for a HomePointe High Velocity Personal Fan. This toroidal…
- Ocena
- 5 / 5
- Polubienia
- 97
- Pobrania
- 942
- Wydruki
- 6
- Wyświetlenia
- 3685
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a 4" (10.16 cm) diameter blade. This was drawn for a HomePointe High Velocity Personal Fan.
This toroidal design was made using ellipses rather than circular shaped blades
It is my opinion that this blade is much quieter than the original stamped sheet metal blade.
The "5_blade" and the "Thick" files circulate the most air.
The toroidal shape works well for circulating air in an area but not for directing it in a strait line. This works well for keeping your whole body cool rather than directing air at one part of your body.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
Regular
Infill:
Any
Filament: 3D Solutech PLA Gray
Notes:
If sliced on Cura, it will likely artifact single layers on the inside curve of the blades. This can easily be snipped or sanded off.
Category: Office