FUNKO Hexagon Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are pcs to create a Funko POP/Soda Display
- Ocena
- 5 / 5
- Polubienia
- 59
- Pobrania
- 393
- Wydruki
- 1
- Wyświetlenia
- 3496
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
These models will allow you to display Funko POPs , Funko Sodas, as well as Cards that are placed in Top loaders.
The Hex Big Shelf will support a Standard 4" Funko POP that are also in Funko Protectors.
The Hex Small Shelf will support a Funko Soda Can or any Loose Funko Figures.
I also created some Hexagon “Fillers” to allow you to create a display on the wall and not look too clustered. These include a FUNKO Logo, a POP! Logo, and a Hexagon that you can slide a Top Loader into.
NOTE: Due to the size of my printer bed I wasn't able to make Hexagons that would allow you to comfortably stack the Normal size Funkos, But this is why I created the “Fillers” and the Small Shelf. Refer to my Photos to see what im referring to.
I attached them to the wall with 2 screws each.
I printed the infill at 20% which seemed to be plenty strong to support the Funkos.
Im sure you could go even less than 20% on the fillers to save time.
****UPDATE****
1/19/2024 - ADDED A TMNT AND STAR WARS SHELF