Thin 5mm radiator bleed key with magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radiator bleed key with magnet.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a couple of radiators in my house that are placed with the valve to bleed it almost against the wall. A standard key did not fit, that's why i created my own.
I added a pocket for a small 5x2mm magnet, so you can easily store it on the back of the radiator. The magnet can be press fitted with a vice and/or glued in.
This can be printed in PLA, but if you stick it to the radiator with a magnet, I suggest you use something that can take more heat (like PETG or PC blend). I printed this with 5 perimeters for extra strength.
Let me know in the comments if you need another dimension for the key or magnet hole.