1 / 3
Anderson Assistor Forklift Battery Tester
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A volt meter for Anderson connectors.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 185
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a simple that can just plug in to a 300 amp Anderson connector, which are standard on forklifts and other similar electric equipment; at least in the US. All you need to assemble this is a panel mount volt meter, two paper clips, and glue.
Instructions:
- Just bend the paper clips to fit in the holes in the back as seen in the photos.
- Push the meter through the hole in the face plate.
- Separate the wires and run them through the groves on each side.
- Wrap each wire around its corresponding paper clip and either solder or glue them.
- Glue the two halves together, and there you go.
- Optional: use a laser engraver to engrave the logo in the back.
Volt meter link: https://www.amazon.com/dp/B0C5998JPZ?ref=ppx_yo2ov_dt_b_product_details&th=1