1 / 3
Anderson Assistor Forklift Battery Tester
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A volt meter for Anderson connectors.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a simple that can just plug in to a 300 amp Anderson connector, which are standard on forklifts and other similar electric equipment; at least in the US. All you need to assemble this is a panel mount volt meter, two paper clips, and glue.
Instructions:
- Just bend the paper clips to fit in the holes in the back as seen in the photos.
- Push the meter through the hole in the face plate.
- Separate the wires and run them through the groves on each side.
- Wrap each wire around its corresponding paper clip and either solder or glue them.
- Glue the two halves together, and there you go.
- Optional: use a laser engraver to engrave the logo in the back.
Volt meter link: https://www.amazon.com/dp/B0C5998JPZ?ref=ppx_yo2ov_dt_b_product_details&th=1