Mercury One.1 EVA toolhead Revo-CR adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you install a Revo-CR in the Zero-G EVA toolhead.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 669
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Allows you install a Revo-CR in the Zero-G EVA toolhead.
I'm scrapping my Ender 2 pro to use as many parts as possible on my custom 180x180 Mercury One.1 MINI build. I couldn't find an adapter to fit the Revo-CR to the EVA toolhead to I made this from the Zero-G CAD.
If you're interested in my merc mini build you can find it here:
https://discord.com/channels/747612067951018075/1161876063538905209
Print updside down using the Zero-G recommended settings.
EDIT: 1/10/24
Adjusted the hotend mounting holes so that it sits higher up and the cooling ducts align properly now. Highly recommend reprinting if you've printed the original. Cheers.
EDIT: 1/13/24
Made another revision to the placement of the mounting holes. This should be the final revision. This places the tip of the nozzle about 2-3mm below the ducts.