Heat Bed Warping Calibration Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you measured every corner and center and discovered warps? With this print you can test which part you have warp…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 208
- Wydruki
- 0
- Wyświetlenia
- 1164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
If you measured every corner and center and discovered warps? With this print you can test which part you have warp and use thin objects to make it perfect.
I saw several test for this case but I made my own quickly on Fusion 360. After several runs I could print a 15x15cm print without problem after this print and using 2x2cm (or post-it) to fix the warp.
Print Settings
Printer Brand:
Anet
Printer:
A8
Yes
Supports:
No
200
Infill:
20
Filament:
BASF Petg natural
Notes:
Any filemant will do good. Petg adhesin was incredibly bad so I used Petg to test for the best results.
Category: 3D Printing Tests