Heat Bed Warping Calibration Print
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you measured every corner and center and discovered warps? With this print you can test which part you have warp…
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 208
- Makes
- 0
- Views
- 1,165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
If you measured every corner and center and discovered warps? With this print you can test which part you have warp and use thin objects to make it perfect.
I saw several test for this case but I made my own quickly on Fusion 360. After several runs I could print a 15x15cm print without problem after this print and using 2x2cm (or post-it) to fix the warp.
Print Settings
Printer Brand:
Anet
Printer:
A8
Yes
Supports:
No
200
Infill:
20
Filament:
BASF Petg natural
Notes:
Any filemant will do good. Petg adhesin was incredibly bad so I used Petg to test for the best results.
Category: 3D Printing Tests