PSU Holder MK4 outside Ikea Lack Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hello everyone, i designend this PSU Holder for the MK4 with the Idea of only using one Ikea Lack table.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 90
- Wydruki
- 1
- Wyświetlenia
- 1136
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hello everyone,
i designend this PSU Holder for the Prusa MK4, with the Idea of only using one Ikea Lack Table and not to put two Ikea Lack Tables on top of each other.
Design:
There are two holes in the backside to screw the PSU holder into the Ikea Lack Table.
- 2x Chipboard Screw with round head M6x20
There are two holes in the side to assembly the Holder to the PSU.
- 2x Cylinderhead Screw M3x10
There is a Switch fixed into the holder, to turn the LED strip (24V) on and off.
- [i get it from this pack: https://www.amazon.de/gp/product/B07KW12KSC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 ]
I used WAGO-Clamps and Cable-Lugs to assembly the electronics.
Versions:
PSU Holder v1
PSU Holder v2 + Cable Cover (optimized after I had already printed v1)
Printing Instructions/Materials:
Supports: yes
Print Resolution: it is up to you
recommended: 0.2-0.3
Material: PLA (sufficient)
You can think about it, to print it in PETG to withstand higher temperature load of the PSU.
But for my Opinion, thats not necessary