SKADIS MAKITA CHARGER AND BATTERY HOLDER
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makita battery charger and battery (18v and 14.4V) holder for IKEA Skadis peg board. The (base) hooks slide into the…
- Ocena
- 5 / 5
- Polubienia
- 100
- Pobrania
- 674
- Wydruki
- 10
- Wyświetlenia
- 3189
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Fits Makita 14.4V and 18V slide batteries. Tested with the DC18RA charger, BL1430 and BL1860B batteries.
If you like it, please hit ❤. It helps other people find the model.
What to print
Battery holder (skadis_mak_bat), 1 per battery, plus [2×] std_base_hook each
Charger mount left + right (mak_char_left / mak_char_right), plus [2×] std_base_hook_mini per side, 4 in total
Lock peg (optional). Stops the hooks from being lifted out of the board.
How it mounts
Slide (hammer if needed) the mounts down onto the hooks
Push the hooks/mount combo into the Skådis board.
Charger: remove the rubber plugs on the back of the charger and screw the charger mounts into those holes. Use 4 small screws, just slightly larger than the holes in the mounts.
Optional: add the lock peg.
Printing
Hooks, lock peg and charger mount print without supports.
Battery holder: lying on its back it only needs minor supports. Printed upright (with supports) it’s stronger.
Fit tip: some makers found the battery fit a bit loose, especially with 18V batteries. For a snugger fit, scale the battery holder down about 2 mm in X in your slicer.
Printed one? Please post a Make with a photo. I love seeing them on real workshop walls! If something doesn’t fit or you have an idea, leave a comment.
☕ Support: I design these in my spare time and share them for free. If this model saved you time or money, please consider a small tip via my profile . Thank you!