1 / 9
SKADIS MAKITA CHARGER AND BATTERY HOLDER — image 1
1 / 9

SKADIS MAKITA CHARGER AND BATTERY HOLDER

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Makita battery charger and battery (18v and 14.4V) holder for IKEA Skadis peg board. The (base) hooks slide into the…

Rating
5 / 5
Likes
100
Downloads
674
Makes
10
Views
3,178
Reviews
8

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Fits Makita 14.4V and 18V slide batteries. Tested with the DC18RA charger, BL1430 and BL1860B batteries.

If you like it, please hit ❤. It helps other people find the model.

What to print

  • Battery holder (skadis_mak_bat), 1 per battery, plus [2×] std_base_hook each

  • Charger mount left + right (mak_char_left / mak_char_right), plus [2×] std_base_hook_mini per side, 4 in total

  • Lock peg (optional). Stops the hooks from being lifted out of the board.

How it mounts

  1. Slide (hammer if needed) the mounts down onto the hooks

  2. Push the hooks/mount combo into the Skådis board.

  3. Charger: remove the rubber plugs on the back of the charger and screw the charger mounts into those holes. Use 4 small screws, just slightly larger than the holes in the mounts.

  4. Optional: add the lock peg.

Printing

  • Hooks, lock peg and charger mount print without supports.

  • Battery holder: lying on its back it only needs minor supports. Printed upright (with supports) it’s stronger.

Fit tip: some makers found the battery fit a bit loose, especially with 18V batteries. For a snugger fit, scale the battery holder down about 2 mm in X in your slicer.

Printed one? Please post a Make with a photo. I love seeing them on real workshop walls! If something doesn’t fit or you have an idea, leave a comment.

☕ Support: I design these in my spare time and share them for free. If this model saved you time or money, please consider a small tip via my profile . Thank you!

Tags