Toyota Supra In The Rain HUEFORGE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toyota Supra In The Rain HUEFORGE
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 320
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print this with 100% infill and 1 wall
First Layer 0.24mm
Layer height .08 mm
Not really a super fun colorful print, but I wanted to try one of my favorite cars. Always open to ideas, they dont have even have to pertain to hueforge. A lot of what I post I do for people because I am bored and not for points. Just having fun on here
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5.1
Swap Instructions:
Start with Black
At layer #8 (1.04mm) swap to Blue
At layer #10 (1.2mm) swap to Blue Gray
At layer #14 (1.52mm) swap to Jade White for the rest.