Toyota Supra In The Rain HUEFORGE
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toyota Supra In The Rain HUEFORGE
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 48
- Makes
- 0
- Views
- 320
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print this with 100% infill and 1 wall
First Layer 0.24mm
Layer height .08 mm
Not really a super fun colorful print, but I wanted to try one of my favorite cars. Always open to ideas, they dont have even have to pertain to hueforge. A lot of what I post I do for people because I am bored and not for points. Just having fun on here
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.48mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5.1
Swap Instructions:
Start with Black
At layer #8 (1.04mm) swap to Blue
At layer #10 (1.2mm) swap to Blue Gray
At layer #14 (1.52mm) swap to Jade White for the rest.