HSW - LED Light Strip Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brackets to hold an extruded aluminum LED channel 13cm (about 5in) out from the Honeycomb Storage Wall.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 186
- Wydruki
- 1
- Wyświetlenia
- 2035
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Add LED lighting to your Honeycomb Storage Wall.
Made to work with this extruded aluminum channel from amazon ($15.99):
https://www.amazon.com/dp/B09YY281KP
The channel should just snap right into the holders. I used one holder per channel segment. I wound up need 3 channels to span a Honeycomb Wall that was 4 honeycombs wide.
Use the channel clips to secure one section of channel to another.
You will need the following for each stem you print:
- 1 x M4x12 socket-head screw
- 1 x M4 hex nut
- 1 x M4 insert from the Original Honeycomb Storage Wall
You can use any LED strip you want, but this is what I used in mine ($10.99):
https://www.amazon.com/dp/B08HD3ZSQV