HSW - LED Light Strip Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Brackets to hold an extruded aluminum LED channel 13cm (about 5in) out from the Honeycomb Storage Wall.
- Rating
- 5 / 5
- Likes
- 90
- Downloads
- 186
- Makes
- 1
- Views
- 2,035
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Add LED lighting to your Honeycomb Storage Wall.
Made to work with this extruded aluminum channel from amazon ($15.99):
https://www.amazon.com/dp/B09YY281KP
The channel should just snap right into the holders. I used one holder per channel segment. I wound up need 3 channels to span a Honeycomb Wall that was 4 honeycombs wide.
Use the channel clips to secure one section of channel to another.
You will need the following for each stem you print:
- 1 x M4x12 socket-head screw
- 1 x M4 hex nut
- 1 x M4 insert from the Original Honeycomb Storage Wall
You can use any LED strip you want, but this is what I used in mine ($10.99):
https://www.amazon.com/dp/B08HD3ZSQV