NORRFLY Light Strip Holder for MK3/MK4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the "MK3 mount for IKEA LED NORRFLY" to fit the MK4 with added clearance for the Nextruder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 184
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a simple mount to mount a 17" NORRFLY light strip (now discontinued) from IKEA to a MK4 (should still work on a MK3 like the original). Liked the old design's simplicity and used it for several months; however, as I started working with taller prints the original design started to interfere with the toolhead.
Should print fine in PLA (that's what I used) but PETG or others should work equally well. I printed using the 0.20 mm SPEED profile for the MK4-IS
- Bumped to 50% infill for a little more rigidity
- I used Honeycomb
- 2 perimeters
- 5 top layers
- 4 bottom layers
- 0.2mm layer height
- No supports needed when printed on side
Print 2 to hold one 17" light bar.