M5 T-slot nut substitute
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reduce costs with this 3D-printed T-slot nut substitute - no load on the 3D print but on a regular washer/M5 not only!
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 176
- Wydruki
- 1
- Wyświetlenia
- 827
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Off-the-shelf T-slot nuts are incredibly expensive. So many have set out to replace those with printed parts, always replicating how those nuts work thus putting a lot of pressure on the printed nut.
With this thing, all load of the joint is put on a 1mm washer, held in place together with the M5 half-nut.
This substitute prints without support and should be sliced at 0.2mm layer-height. If sliced at a different height, chances are it won't fit.
This part served as a T-Slot nut substitute for my MendelMax build, using http://uk.rs-online.com/web/p/products/837-234/ nuts and http://uk.rs-online.com/web/p/products/525-931/ washers together with KJN extrusions.
The OpenSCAD file contains part of Catarina Motas Shape Library: http://svn.makerbot.com/users/hoeken/openscad/shapes.scad
(previously posted on Thingiverse - I am the original author