1 / 5
Kleiderhaken für Spinde mit Ovaler Stange/ Clothes hook for lockers with oval bar — zdjęcie 1
1 / 5

Kleiderhaken für Spinde mit Ovaler Stange/ Clothes hook for lockers with oval bar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This hook is for oval clothes rails with a height of approx. 16mm and a width of 10mm. Printing takes about 18 minutes.

Ocena
5 / 5
Polubienia
5
Pobrania
68
Wydruki
1
Wyświetlenia
357
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The hook is intended for clothes rails that have an oval shape and a height of 16mm and a width of 10mm.

By scaling, the size can be easily adjusted to other dimensions of clothes rails.

Printed with a 0.8mm nozzle, the print takes approx. 18 minutes.
With 15% infill it can also hold a handbag without any problems.

No support structure is required for printing.

For scaling and possible improvements, I also uploaded the file for Autodesk Fusion.

Der Haken ist gedacht für Kleiderstangen welche eine Ovale Form und eine Höhe von 16mm so wie eine breite von 10mm haben.

Durch Skalierung lässt sich die Größe einfach an andere Dimensionen von Kleiderstangen anpassen.

Gedruckt mit einer 0,8mm Düse benötigt der Druck ca. 18. Minuten.
Bei 15% Infill hält er auch eine Handtasche ohne Probleme aus.

Für den Druck wird keinerlei Stützstruktur benötigt.

Für Skalierung und evetuelle Verbesserungen durch auch hab ich die Datei für Autodesk Fusion mit hochgeladen.

Tagi