KLR250 License Plate Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will fit all 4x7" US License Plates, typically used for motorcycles. Apparently there is no mounting hole…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This will fit all 4x7" US License Plates, typically used for motorcycles. Apparently there is no mounting hole standard for motorcycles like there is with four+ wheeled vehicles, so I left them for you to drill yourself to match your plate.
Nothing fancy at all, seems to hold up with some moderate trail riding and back-roads. I may add a tether to help prevent/mitigate losing a license plate while on the trail.
There's a thick and a thin version. Once I printed it I didn't see the need for a thicker plate-side, so I modified it, I just haven't printed it yet because the thick one still meets the legal requirement, and the thick edges are better for putting red retro-reflective tape on.
Post-Printing
You will need to drill your license plate mounting holes.
Make sure you use locking bolts to secure your plate. I had to add some double-stick tape as well to stop the rattle.
Category: Automotive