KLR250 License Plate Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This will fit all 4x7" US License Plates, typically used for motorcycles. Apparently there is no mounting hole…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 23
- Makes
- 0
- Views
- 313
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This will fit all 4x7" US License Plates, typically used for motorcycles. Apparently there is no mounting hole standard for motorcycles like there is with four+ wheeled vehicles, so I left them for you to drill yourself to match your plate.
Nothing fancy at all, seems to hold up with some moderate trail riding and back-roads. I may add a tether to help prevent/mitigate losing a license plate while on the trail.
There's a thick and a thin version. Once I printed it I didn't see the need for a thicker plate-side, so I modified it, I just haven't printed it yet because the thick one still meets the legal requirement, and the thick edges are better for putting red retro-reflective tape on.
Post-Printing
You will need to drill your license plate mounting holes.
Make sure you use locking bolts to secure your plate. I had to add some double-stick tape as well to stop the rattle.
Category: Automotive