Train Whistle (pocket size, 4-tone)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 4-tone steam train whistle. Small enough to fit in a pocket, but surprisingly good sound!
- Ocena
- 4,5 / 5
- Polubienia
- 37
- Pobrania
- 577
- Wydruki
- 2
- Wyświetlenia
- 1256
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 4-tone steam train whistle of my own design. Small enough to fit in a pocket, but pretty good sound. Should be relatively easy to print without supports, tho may need cleanup after.
The top of the whistle has a spot to feed a string through, for a strap/lanyard/necklace.
V2 has a wider/deeper tone range, and fully utilizes all available internal space, so it should print faster & use less material. There can be a couple tricky moments while printing V2, but it should get past them ok, and it's easy enough to clean a few stray strings out of the openings, after the print is done.
To better hide print seams, I turn the whistle 45 degrees on the Z-axis on the print bed, and set seam alignment to back. For some reason, the sound tends turns out better when I do this. Let me know if you find a better way.