Columbus Crew Stadium, Lower.com Field - Ohio, USA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🇺🇸 🏟 ⚽ Easy-to-print miniature of a Major League Soccer (MLS) stadium. No supports.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 163
- Wydruki
- 0
- Wyświetlenia
- 658
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🇺🇸 Welcome to Columbus, Ohio! ⚽ 🏟
Lower.com Field is a soccer-specific stadium in Columbus, Ohio, United States. It serves primarily as the home stadium of the Columbus Crew of Major League Soccer since July 2021, replacing the club's previous home, the Historic Crew Stadium. The new stadium cost $314 million and is located at the center of the mixed-use Astor Park development adjacent to the Arena District and downtown. It seats 20,371 spectators and includes 30 suites and 1,900 club seats (from Wikipedia).
Columbus Crew were MLS Champions in 2020. MiniWorld3D is happy to bring this model to life as a homage to all the fans of Columbus Crew!
This model was made by Dany Sánchez.
If you appreciate our work, please consider joining our Printables Club or Patreon!
printables.com/@MiniWorld3D
patreon.com/MiniWorld3D
Find all our profiles, YouTube channel & social media on:
Join our 40K followers on IG!
MiniWorld 3D is a collective of 55+ artists creating the best library of 3D printable models of landmarks of the world!
Photo credits: @cHipsandRamen
Names And Related Indicia Are Property of their respective owners. This model is fan work. No infringement is intended.
-----------
Printing Tips
Suggested parameters:
For better details, print slow, such as 15 or 20mm/s for outer perimeters.
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: 12%-16%. Lightning pattern suggested.
Two versions provided, with and without the sponsor logo on the roof.
No supports needed, truly. If you are skeptical, try it without supports first, nothing to lose.
You can use the pause-and-change filament method to have multiple colors with a regular setup. Start with green for grass, then grey for concrete, and up with darker grey for the roof.