1 / 9
Cosmetic Aluminum Can Desiccants — zdjęcie 1
1 / 9

Cosmetic Aluminum Can Desiccants

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Use small aluminium cosmetic can containers as refillable desiccant sachets. Drill templates for 20ml and 30ml can's.

Ocena
0 / 5
Polubienia
1
Pobrania
13
Wydruki
0
Wyświetlenia
125
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

What? 

Two simple templates that fit snuggly over the bottom of the 20ml and 30ml aluminium cosmetic cans purchased from Aliexpress. Once in position, I use a drill to make the holes. Clean up the filings and scrape back any sharp edges, fill with desiccant and screw on the cap.

I purchased two sizes from Aliexpress for about 50 and 55 cents AUD. The 20ml holds 13g of desiccant, and the 30ml holds 26g. Assuming these are standard sizes, these templates should work for you using the same size can.

This is the vendor I purchased from (not a recommendation): https://www.aliexpress.com/item/1005003660983813.html

Why?

I wanted something similar to a sachet that would allow the desiccant to be replaced easily. I considered printable options. However, I thought it would take longer, and I couldn't find something small enough. These cans seemed like a perfect option; they just needed the required holes to transfer moisture. I use the desiccant cans in filament spools, tool cases, and storage boxes.

Extra Notes 

  • I used a 2mm drill bit.
  • Use a little bit of painter's tape folded over between the template and the can.
  • Drill through the bottom of the can, not the lid. Deforming the lid may make it harder to screw back together.

Tagi