1 / 1
A frame desk foot
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desk foot designed to be printed in TPU.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
My dad got quite frustrated with his new A frame desk, the type you see on places like etsy, as the cloth feet kept falling off. This meant the desk slid around a lot and became a pain to use.
What I've knocked up is a push fit basic design that slips on each leg. Designed to be printed in TPU, this adds a foot that won't come off or slide about a lot, without scratching the floor.
It is designed to fit a leg that is 25.44mm wide, 75.3mm long, and with an angle of 75.7 degrees.
I printed these in 100% infill.