Adjustable doll stand for fashion dolls in higher education
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stable doll stand for fashion dolls in higher eduction
- Ocena
- 4,5 / 5
- Polubienia
- 107
- Pobrania
- 860
- Wydruki
- 5
- Wyświetlenia
- 4010
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Since the original was copy right struck on a different site, I redesigned this doll stand for generic fashion dolls of about 25 to 30 cm height.
These dolls may or may not attend schools of secondary education, potentially with a supernatural twist. I wouldn't know.
The shaft should be printed flat on the print bed.
Assembly:
Insert the shaft into the base. This may require a little bit of force, as the tolerances are fairly tight.
Insert a M3 bolt of at least 8 mm into the bottom of the base plate to fix the shaft to the base.
Insert a M3 nut and bolt in the clip as shown in the picture. The bolt should be at least 8 mm long.
put the clip on the shaft and use the bolt to fix it at the desired height.