Adjustable doll stand for fashion dolls in higher education
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stable doll stand for fashion dolls in higher eduction
- Rating
- 4.5 / 5
- Likes
- 107
- Downloads
- 867
- Makes
- 5
- Views
- 4,029
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Since the original was copy right struck on a different site, I redesigned this doll stand for generic fashion dolls of about 25 to 30 cm height.
These dolls may or may not attend schools of secondary education, potentially with a supernatural twist. I wouldn't know.
The shaft should be printed flat on the print bed.
Assembly:
Insert the shaft into the base. This may require a little bit of force, as the tolerances are fairly tight.
Insert a M3 bolt of at least 8 mm into the bottom of the base plate to fix the shaft to the base.
Insert a M3 nut and bolt in the clip as shown in the picture. The bolt should be at least 8 mm long.
put the clip on the shaft and use the bolt to fix it at the desired height.