1 / 4
Japanese Saw holder for IKEA Skadis (Z-Saw Dozuki) — zdjęcie 1
1 / 4

Japanese Saw holder for IKEA Skadis (Z-Saw Dozuki)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple hanger/holder for the IKEA Skadis Board to hang a Japanese Saw e.g. Dozuki, Kataba or Ryoba.

Ocena
4,667 / 5
Polubienia
18
Pobrania
123
Wydruki
3
Wyświetlenia
619
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

This is a holder to hang a Japanese Saw on the IKEA Skadis Board. The original version was perfect for my Kataba but was too small to fit my Z-Saw Dozuki Fine 240. So I remixed it and made the intake a little bit wider and longer. Now it takes up the saw just perfect.

The holder uses the Skadis Universal Hook by CSD_Salzburg. To install put the hook on the board and slide the hanger on the hook from the top. Press down and to the board simultaniously and it should click in.

The intake for the saw has an oval shape and is about 3 cm long and 2.1 cm wide.

Printed in PETG with 0.24 height, 20 % infill and 3 perimeters.

Tagi