Aqara motion sensor mount (four versions)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalistic corner and wall mount for Aqara motion sensor.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 690
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
About
Minimalistic corner and wall mount for Aqara motion sensor. Only the bottom part is visible when attached to the wall. Choose the version that suits your corner. E.g. a not smooth surface doesn't have a sharp, 90 degree, corner so you're best of with the rounded inwards or rounded outwards version.
Attachment
Attach the mount with with double sided tape or something similar (e.g. Tesa powerstrips are easily removed without leaving any residue). On surfaces that are not smooth enough for this you can use moldable glue (e.g. Tesa Sugru).
Print instructions
Based on one print run: model printed upwards with no support, 0.3 mm.