Gridfinity Hand Friendly Magnet Nail for Friction Fitting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tool for Gridfinity magnet installation that is comfortable to be used with just a hand.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
I was trying to use https://www.printables.com/model/492841-hammer-magnet-nail-for-friction-fitting to install magnets in my Gridfinity bases and containers. I found that it's too small to hold comfortably to use a mallet with. I also found that it's not always necessary to use a mallet. I can press fit them. These should be comfortable to use.
I recommend 100% infill if you plan to use a mallet to install the magnets.
The nail labeled “BASE,” is intended to have a magnet installed that is the is in the same orientation as the base. The boxes nail is for the boxes and containers. I found that this was easier to remember than just a + or - sign.