1 / 2
Jet 14-DXPRO Bandsaw Belt Tension Reminder — zdjęcie 1
1 / 2

Jet 14-DXPRO Bandsaw Belt Tension Reminder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hinged cover for the bandsaw power switch serving as a visual reminder to [de-]tension the belt before/after use

Ocena
0 / 5
Polubienia
1
Pobrania
20
Wydruki
0
Wyświetlenia
172
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

The Jet 14-DXPRO bandsaw has a tensioner handle behind the top wheel and nearly out of sight. I'm not used to tensioning the blade before use and de-tensioning when done yet, so I made this cover for the power switch that should prompt me.

Model comes in 2 parts as I used this opportunity to learn print-in-place ball hinges meaning flat surface, plus it gives the nice texture of the print plate to the face of the cover. Easy modification of the text portion as its own model should hopefully lend to model reuse.

The ball hinge has a tight enough tolerance so that the cover sits easily in the fully upright position when open, however, will catch lightly in 2 places on the way back down. This keeps it easy to open, but your STOP button is never accidentally covered up.
 
The collar bit that attaches everything to the power box installs with no modifications to the power unit. The two blades fit behind the faceplate of the power switch and a small strip of hot glue under each side will hold everything in place. Firmly attached, but easily removed in the future. 


STL's, Fusion project files, finished pics, & gcode files attached!

Tagi