Deku Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
Deku Hueforge
Color Swap
Some of the colors seem unnecessary but this is what my young son designed in hueforge. The print picture shows the prime tower on the picture, as he forgot to move it before printing (lol). He will never make that mistake again. lol.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Beige Transmission Distance: 8
PETG GEETECH Gray Transmission Distance: 3
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Marine Blue
At layer #2 (0.24mm) swap to BambuLab Green
At layer #4 (0.4mm) swap to Black
At layer #8 (0.72mm) swap to Beige
At layer #16 (1.36mm) swap to Gray
At layer #17 (1.44mm) swap to Scarlet Red
At layer #19 (1.6mm) swap to White for the rest.
Please "Like", review, follow and upload make.
I spend a lot of time designing and allow it all to be used for free (including commercially).
If you'd like to help me out, below are the possible ways. Thank you in advance!
https://www.buymeacoffee.com/dohara1985o
Venmo: Dohara1985
Paypal: @Dohara1985