Towel hooks and holders for heater, shower, and pool - also for shower wipers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Towel hooks with 21.5 mm and 25.5 mm inner diameter. Compliant design which locks securely to whatever you attach it to.
- Ocena
- 4,5 / 5
- Polubienia
- 67
- Pobrania
- 157
- Wydruki
- 2
- Wyświetlenia
- 1028
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
If you need a different size, just let me know – I will be happy to make a fitting one for you! :)
Contrary to other designs, this one actually locks to your heaters, etc. through a compliant mechanism designed into the head. Quite simple, but rather effective: Gone are the days when lifting your towels also lifts the hook, it falls down, and you have to pick it up yet again.
The bottom part is designed to be long enough to rest on the heater, glass, wall, or whatever you're mounting this hook onto. This stabilizes the hook and avoids the wobbling you'll get with many other hooks.
0.4mm nozzles will give you the quickest print time as I optimized the model for that size.
I recommend printing this in PETG with 0.2mm layer height, but PLA & stiff TPU also work just fine. ABS etc should also work, but I don't know of anyone who used that. If you do, please leave a comment.
With a new parametric design I can also accommodate other diameters – just ask :)
If you want to modify them yourself, use the STEP files.
As can be seen in the last photo, it's also a great way to use up filament leftovers and have fun colors in the hooks.