Anycubic Kobra / Kobra 2 / Kobra 2 Pro Toolbox v02
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a toolbox for the Anycubic Kobra / Kobra 2 / Kobra 2 Pro 3D printer, which is mounted in the screen area.
- Ocena
- 4,375 / 5
- Polubienia
- 220
- Pobrania
- 1811
- Wydruki
- 9
- Wyświetlenia
- 8159
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a toolbox for the Anycubic Kobra / Kobra 2 / Kobra 2 Pro 3D printer, which is mounted in the touchscreen area.
Print the toolbox in vertical position.
Print the inside component in orizontal position.
You can check my other toolboxes :
https://www.printables.com/model/729540-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-02
https://www.printables.com/model/733765-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-03
https://www.printables.com/model/736226-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-04
https://www.printables.com/model/736606-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-05
https://www.printables.com/model/737756-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-06
https://www.printables.com/model/741401-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-07
Printing parameters for both :
Layer height : 0.2
Perimeters : 3
Solid layers : 4
Infill : 15%
Support : YES - only for main body
Brim : Outer brim only 10 mm
Material : PLA
Printer : Anycubic Kobra 2 Pro
Please keep in mind that tall objects should be added to this toolbox, towards the screen area.
If you store them on the opposite side, there is a risk that when the print makes reference to the Z axis, it will collide with those tall tools.
If you print this accesories please share your make, leave a review, and drop a like!