1 / 1
Creality Falcon 2 6mm Laser Crosshair Bracket — zdjęcie 1

Creality Falcon 2 6mm Laser Crosshair Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This friction mount is to mount a small 6mm diameter laser crosshair module on the Falcon 2 22/40w laser module.

Ocena
5 / 5
Polubienia
18
Pobrania
200
Wydruki
1
Wyświetlenia
1348
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This mount is to add a slim laser crosshair for the Creality Falcon 2 22/40w laser engraver/cutter. Many available laser mounts use large crosshairs and are thus heavily braced on the tool head. Instead I found a small diameter crosshair laser on amazon and added a USB pigtail. Once you attach the USB pigtail with solder, yes please solder it and shrink wrap it, then press it into the mount. I rec0ommend setting focus before attaching the laser mount to the module. Just place the mount with laser over the screw and set focus and orientation then mount it tot he head with the 6mm screw.

6mm +3v/5v Laser Crosshair 

USB C pigtail

Extra hardware: 6mm screw to replace the 4mm from the laser module

Print Settings:

  • 0.2mm Layer
  • material: ANY
  • Filament used(g): 2.4g
  • Filament used(m): 0.81m
  • Est Cost (PLA): $0.06(usd)
  • Print time: ~8min

Tagi