1 / 3
Linear rail upgrade for SV07 printed parts.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pieces needed for liner rail upgrade of Sovol SV07 using Ender 3 y axis upgrade kit and a simple linear rail for x axis.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 1567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 5)Remiksy (0)Kolekcje (38)Powiązane
Parts needed to lift y axis 4020 extrusion in order to mount linear rails on the sides to use ender 3 upgrade kit.
Print instructions: if the printer will be used with enclosure I suggest printing in PETG, ASA or ABS if the chamber temp will go past 50 C.
Use at least 50% infill, 3 or 4 wall count and 4 or 5 top and bottom layers. Make it as solid as possible so there is no flex, you plate will be seated on these pieces of plastic.