Parametric phone case (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a fusion model that you can import and easily adapt to fit whatever phone model you have.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 116
- Wydruki
- 0
- Wyświetlenia
- 564
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
As the title says, this is a parametric 3D model for a phone case in fusion360.
If you want to access the parameters and don't know how, use the “s” keybind to open the shortcut dialog, and type “parameters”. The different values alter different aspects of the model, and you can change them to see how the model changes.
This model may not be completely comprehensive - I have not tested it in every possible configuration. However, it should work for a variety of phones.
Printing guidelines -
I used PLA and PLA+ for my phone cases, as I found PETG to be brittle. However, you can experiment with different filaments to see what works best for you. I've been using PLA cases and found them to be very durable, having used one for over a year. I have not tried TPU, but if you want to use it, have fun and report back!
Your tolerances should be pretty tight. If they aren't, you might notice that the phone move slightly in the case. For that, you can also turn down the height a little bit, so that the phone is secured better by the overlap.
I would recommend printing with higher temperatures, slightly higher flow rate, lower fans, and lower speeds to improve layer adhesion. If layer adhesion is too low, the sides might come off or be weak.
I would recommend using a .4 nozzle, mostly for a better fit.