Mandalorian's Dark Saber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replica of the Dark Saber from the tv series The Mandalorian.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 151
- Wydruki
- 1
- Wyświetlenia
- 977
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
The Dark Saber!
This is a replica of the dark saber from the tv series The Mandalorian.
it is composed of 9 different parts to print and assemble.
Assembly items needed:
- 2x 0.25 in dowel rod
There are two holes that go through the entire saber where the dowel rods will slide in for strength.
Printing recommendations:
- 10% - 20% infill
- print standing
- supports possibly needed depending on printer, very little bridging on holes that don't go all the way through. I personally would not add supports.
- printing the hilt may need supports, or cut the hilt in half to have a flat area to print. Whichever is easier.
Entire sword is roughly 48 inches.
I have provided a full sword as well for free use!