Mandalorian's Dark Saber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a replica of the Dark Saber from the tv series The Mandalorian.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 151
- Makes
- 1
- Views
- 977
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
The Dark Saber!
This is a replica of the dark saber from the tv series The Mandalorian.
it is composed of 9 different parts to print and assemble.
Assembly items needed:
- 2x 0.25 in dowel rod
There are two holes that go through the entire saber where the dowel rods will slide in for strength.
Printing recommendations:
- 10% - 20% infill
- print standing
- supports possibly needed depending on printer, very little bridging on holes that don't go all the way through. I personally would not add supports.
- printing the hilt may need supports, or cut the hilt in half to have a flat area to print. Whichever is easier.
Entire sword is roughly 48 inches.
I have provided a full sword as well for free use!