Mountain Bike with flex spoke rims (WIP)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trek Remedy bike model, with "stretched spoke" rims inspired by Syncros Silverton SL One-Piece Carbon Wheels.
- Ocena
- 5 / 5
- Polubienia
- 50
- Pobrania
- 190
- Wydruki
- 2
- Wyświetlenia
- 1084
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a WIP I did during 2020 (as a birthday present for my dad, his bike), and never got around to improving so posting as-is.
It has “stretched spoke” wheels - which are printed flat (in 2 halves) and then flexed to their width, with an inner “spacer” in the hub. I got inspired by the “Syncros Silverton SL” rims, and it turned out great with very little flex force needed.
Current issues -
- Used 12 M2x4 screws, which are a bit finnicky to thread. I wanted to make it use fillament pins.
- Suspension sort of works, but not really
- The “Joining Pin” for the wheel was too tight to slide fully into the rail in the wheel. I ended up using them for initial alignment and then added superglue. A “snap pin” would probably work better
- Front suspension doesnt work
If someone wants to fix these and remix the model (or just take the wheels), let me know, I can provide 2021 Solidworks files, or STEP files.