Generic Infared Thermometer Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I was tired of always searching for my IR gun. Made a little wall mount holster. Set it up for screw holes, as I've had poor luck trying to print pegboard compatible items.
It's a little tight on the sides for my brand (Nubee); but part of what holds it in place. I focused mostly on it being held in place by a pivoting action. Holster will hold ir gun at 30 deg angle, and the weight of the gun wanting to fall out will help hold it in.
I printed with PETG, as it's a little more flexible. PLA should work fine also.
Print with base plate down, and it should print easily with no supports.
Print Settings
Printer:
QidiTech 1
Rafts:
Yes
Supports:
No
Resolution:
.2
Infill:
15%
How I Designed This
Measure, print, measure
I measured all of the curve absolute sizes (anyone with one of these guns knows there's radii everywhere). I did a rough out, and printed it 2mm tall. Then took that template and held it on my ir gun, and made modifications. Second round was functional, and that's all I needed.
Category: 3D Printing