1 / 3
C1 Chaser 1200mm, FC 36x36 Mount, Holes 30.5x30.5
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
C1 Chaser 1200mm, FC 36x36 Mount Designed to fit the C1 Chaser flying wing, provides base for mounting 36x36 FC, holes…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
C1 Chaser 1200mm, FC 36x36 Mount
Designed to fit the C1 Chaser flying wing, provides base for mounting 36x36 FC, holes are at 30.5x30.5.
Recommended print materials:
- PLA
- PETG
- ABS
Print orientation
STL is in correct orientation, no supports needed.
Assembly
- Screw in M3 button head screws from bottom, length suitable for required FC / STACK, screws will thread themself in and lock.
- Dry fit height and fit into craft.
- Cut slits for the x4 prongs and glue in place using E6000.
Revisions Tracking
28.06.2019 - Added.
Will be happy to modify or adjust if someone needs something else.
Happy flying.
Category: R/C Vehicles
