Bambu Lab X1c rectengular temperature- and hygrometer for buildchamber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for the rectengular hygrometers
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Frame for a rectengular hygrometer for the X1c from Bambulabs.
The point really is, that it can also show the temperature and I had nothing else around.
In the picture it is printed with PLA-CF although I do recommend printing it at least in PETG. The reason for this is resistance due to the higher temperatures in the buildchamber…although I am pretty sure PLA will be fine, I have never seen the x1c go over 55 Celsius. Better be safe though.
Printed with 01. layerhight, first layer as well. 25 % infill, no supports needed, but you might have to drill out the holes with a 2.5mm drill to clean them up.
Have fun printing, please comment if you have any suggestions.