Bambu Lab X1c rectengular temperature- and hygrometer for buildchamber
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed for the rectengular hygrometers
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 82
- Makes
- 0
- Views
- 454
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Frame for a rectengular hygrometer for the X1c from Bambulabs.
The point really is, that it can also show the temperature and I had nothing else around.
In the picture it is printed with PLA-CF although I do recommend printing it at least in PETG. The reason for this is resistance due to the higher temperatures in the buildchamber…although I am pretty sure PLA will be fine, I have never seen the x1c go over 55 Celsius. Better be safe though.
Printed with 01. layerhight, first layer as well. 25 % infill, no supports needed, but you might have to drill out the holes with a 2.5mm drill to clean them up.
Have fun printing, please comment if you have any suggestions.