IKEA Skaftet Floor Lamp Custom Pipe Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom connector for IKEA Skaftet allows easy installation, maintaining original design. Minimal modification.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 585
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Custom connector facilitates a modification for IKEA Skaftet.
To install, remove the two existing screws at the top and insert this piece between the original components. The design includes a pass-through for the existing cable, ensuring minimal alteration to the orignal product.
Existning screws at the top of Skaftet need to be removed and this pice inserted between the original parts. There is a passthrou in the pat for the existing cable. This modification requires minimum modification of the existing produkt
Material needed:
- 2xScrews: M4 DIN 7985 4,0x10 mm
- 1x Nut: M4 DIN985
- PETG Filament. PLA is not recommended because of *Creep
*Creep: If a 3D printed object made of PLA is under constant load or stress for an extended period, it might experience deformation or a change in its shape over time due to the creep behavior of the material.
Note: I will use black steel screws for the final assembly.
In the images within this post, steel screws are showcased.