VoroKnot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Terefoil knot with the Voronoi effect. A very light weight model
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 78
- Wydruki
- 2
- Wyświetlenia
- 280
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
VoroKnot
The G-code has very small supports on the bottom of the model in order to make it stick to the hotbed. this was done with a support modifier cube placed on top of the model, leaving a very small section on the bottom for the supports to grow.
These supports are easily removed after printing.
This model can be challenging for the 3D printer if you have stringing problems.
I tried lowering the nozzle temp and changed the retraction settings until i got a better result. Maybe with your filament you will gat better results.
This model would look fantastic if printed larger with a metallic looking filement.
would love to see it is one of you has a try.